ETS2-77 Eddy Current Single Rail 8-Channel Flaw Detector for Track Inspection

The ETS2-77 is intended for the mechanized inspection of rails and switches as well as confirmation of the results of a grinding application. The device is capable of testing a wide range of rail profiles.

 

Application

  • possibility to control the rail track and the track switch;
  • selective control of the separate rail track areas;
  • post grinding machines control;
  • all main rail profiles control Р50, Р60, 49E1, UIC 60 and others.
Types of rail defects
  • Lightweight and compact

Weight of the assembled flaw detector does not exceed 23 kg (50 lbs).

Overall dimensions of the assembled flaw detector are not more than:

  • width – 900 mm
  • length – 1730 mm
  • height – 350 mm

The ETS2-77 flaw detector is a folding structure, which can be transported as it is a assembled in stowed position.

  • Main Components

  • Aluminium base frame
  • Eddycon D – multichannel eddy current flaw detector
  • Scanning modules with eddy current probes (ECP)
  • Laptop
  • Software for test data input, storage and processing
  • Reference block
ETS2-77 Eddy Current Single Rail 8-Channel Flaw Detector for Track Inspection (2)
Types of rail defects
  • ETS2-77 intended use

The ETS2-77 is intended for the mechanized inspection of rails and switches as well as confirmation of the results of a grinding application. The device is capable of testing a wide range of rail profiles.

The eddy current technology enables localizing the following surface defects:

  • progressive transverse cracking (International Defect Code (UIC) 211);
  • fissuring /scaling at the gauge corner (International Defect Code (UIC) 2223);
  • shelling of the gauge corner (International Defect Code (UIC) 2222);
  • wheel burn (International Defect Code (UIC) 225).

The eddy current rail inspection equipment ETS2-77 is capable of evaluating the vertical depth of the defect, thus allowing a more efficient management of rail defects. The inspector can easily decide on the defect removal method: grinding, milling or re-railing, which saves time and money.

  • Program for setting up the EC channel

Eddy current single-rail 8-channel flaw detector ETS2-77 software
  • Quick set up of all EC channel parameters – EC probe frequency, drive voltage, gain, filters, threshold level, sync type, etc
  • Four independent threshold levels for automated defect triggering (ALARM) for each displayed area
  • Saving the testing setups into the PC or tablet’s memory
  • Program for the testing

  • Real-time display of 8 EC probes information
  • Recording the testing results into the PC or tablet memory
  • Display of different types of information in the signal visualization area
  • Re-calculation of the obtained defectograms
Eddy current single-rail 8-channel flaw detector ETS2-77 software
  • Program for generating the names of railroads

Eddy current single-rail 8-channel flaw detector ETS2-77 software

Consists of the following components:
Railroads – Divisions – Sectors – Stages

  • Program for reviewing the testing results

Eddy current single-rail 8-channel flaw detector ETS2-77 software
Eddy current single-rail 8-channel flaw detector ETS2-77 software
  • Reading the test results from the database
  • Printing out the test reports
  • Archiving the test results
  • Reviewing the test results from the remote PC , etc
Model ETS2-77
Flaw detector type mechanized
Overall dimensions in the stowed position 1730 mm × 900 mm × 350 mm
Eddy current channel Eddycon D
Scanning device
  • scanner of the gauge face of the rail
  • scanner of the rolling surface control
ECP quantity 8
Tested area by one ECP 6 mm
ECP protection from the abrasion and damage Ceramic protective cover
Test velocity Up to 2 m/s
Alarm Visual
Specialized software
  • setup program
  • test program
  • results review program
Operating time 8 hours
Record and data storage

+

PC hard disk

Working PC Industrial one, IP rating 65

Featured Products